Section 01 · We make it

Engineered for the most demanding lifts.

Eight engineered configurations from compact single-point beams to large-span modular systems used on critical project lifts. Every product is designed under ISO 9001:2015 and supplied with full test certification.

Spreader Beams & Lifting Frames

A beam for every lift geometry.

From 0.5T compact beams to 3000T critical-lift modular systems. Built to ASME BTH-1 (Cat B), EN 13155, IS 7155 — with material test certificates and proof-load test report on every unit.

22MSB
MSB Series
Modular Spreader Beams
Bolt-together system with interchangeable Tube X struts and Titan Lug end units. Adjustable spans 0.25 m – 15 m+.
25 T – 3000 T
View MSB
26TSB
TSB Series
Telescopic Spreader Beams
Sliding inner tube with secure incremental locking. One beam covers a range of lift sizes.
25 T – 250 T · adjustable
View TSB
28SLF
SLF Series
Spreader Frames
Multi-point square / rectangular frames for 4-corner balanced lifts with reduced headroom.
10 T – 1500 T · to 10×10 m
View SLF
31SPB
SPB Series
Single-Point Lifting Beams
Central top hook, vertical slings — eliminates compressive force on sensitive loads.
1 T – 800 T
View SPB
32LFR
LFR Series
Rigid Lifting Frames
Welded fixed-point frames for absolute load stability under strict headroom constraints.
2 T – 800 T
View LFR
33MLF
MLF Series
Multi-Point Lifting Frames
Telescopic adjustable-span frames with multiple bottom pickup points.
2 T – 50 T
View MLF
Slings & Assemblies

In-house swaged. Tested before despatch.

Wire rope, polyester and chain slings — single-leg, multi-leg, endless and grommet configurations. Each assembly tagged, certified and re-traceable.

37WR sling
WRS Series
Wire Rope Slings
In-house swaged and hand-spliced. Single-leg WRS series 12–64 mm; multi-leg bridles; cable-laid grommets to 1138 T.
1.8 T – 1138 T (grommet)
View WR slings
41Polyester slings
Polyester Slings
Web & Round Slings
Lightweight, surface-friendly polyester webbing. Colour-coded by WLL per EN 1492-1/2.
1 T – 50 T+ (round)
View polyester
39Chain sling
Chain Slings
G80 / G100 Chain Slings
1, 2, 3 and 4-leg assemblies. Master link, oblong sub-links, clevis/eye fittings to EN 818-4.
G80 / G100 · to 31.5 T per leg
View chain slings
Cargo Handling & Below-the-Hook

DNV-certified offshore. Engineered for the load.

Cargo Carrying Units to DNV 2.7-1 / EN 12079, plus engineered below-the-hook devices for application-specific lifts.

43DNV CCU
DNV CCUs
DNV Offshore Containers
Freight, service modules, waste skips, baskets & tank frames — DNV 2.7-1 / DNVGL-ST-E271 type approved. LR / BV on request.
DNV Type Approved
View DNV range
34C-Hook
Below-the-Hook
C-Hooks, Delta Plates & Container Spreaders
Engineered application-specific BTH devices. ASME BTH-1 (Cat A or B) with FEA where geometry warrants.
Application-specific
View BTH range
45Container spreader
Container Handling
Container Spreaders
Fixed and telescopic spreaders for ISO container handling. Twist-locks for 20 / 40-ft, certified to ISO 1161.
ISO 1161 corner castings
View spreaders

Manufactured to international code.

EN 13155ASME BTH-1 (Cat B)ASME B30.20ASME B30.9API 2CDNV 2.7-1DNVGL-ST-E271EN 12079EN 13414-1/2/3EN 1492-1/2EN 818-4EN 1677IS 2266IS 7155IS 15740ISO 9001:2015

Need a custom build?

Share the load drawing, we'll engineer it. Lift studies, FEA, full proof-load test certificate — all in-house, all under one roof.

Talk to engineering →